1. Kun Wang, Huanting Wang, Yi-Bing Cheng. Morphology control of mesoporous silica-carbon nanocomposites via phase separation of poly(furfuryl alcohol) and silica in the sol-gel synthesis, Journal of Sol-Gel Science and Technology, 2017, 82: 664-674
2. Kun Wang, Huanting Wang, Yi-Bing Cheng. Large-scale Synthesis of a-Si3N4 Nanofibers and Nanobelts from Mesoporous Silica-Carbon Nanocomposites, Journal of Ceramic Science and Technology, 2017, 08: 259-264
3. Kun Wang, Xiaocheng Lin, Gengping Jiang, Jefferson Zhe Liu, Lei Jiang, Cara M, Doherty, Anita J, Hill, Tongwen Xu, Huanting Wang. Slow Hydrophobic Hydration Induced Polymer Ultrafiltration Membranes with High Water Flux, Journal of Membrane Science, 2014, 471: 27-34
4. Kun Wang, Yao Zeng, Li He, Jianfeng Yao, A, K, Suresh, Jayesh Bellare, Tam Sridhar, Huanting Wang. Evaluation of quaternary phosphonium-based polymer membranes for desalination application, Desalination, 2012, 292: 119-123
5. Kun Wang, Huanting Wang, Yi-Bing Cheng. Synthesis of nanostructured silicon carbide spheres from mesoporous C-SiO2 nanocomposites, Chemical Communication, 2010, 46 (2) : 303-305
6. Kun Wang, Jianfeng Yao, Huanting Wang, Yi-Bing Cheng. Effect of seeding on formation of silicon carbide nanostructures from mesoporous silica-carbon Nanocomposites, Nanotechnology, 2008, 19 (17): 175605 (8pp)
7. Kun Wang, Tianya Tan, Zhengyi Fu, Jinyong Zhang, Yucheng Wang, Weimin Wang, Qingjie Zhang. Study on atom diffusion under the treatment by pulse current heating, Materials Science and Engineering B, 2006, 135 (2): 154-16
8. Kun Wang, Zhengyi Fu, Weimin Wang, Yucheng Wang, Jinyong Zhang, Qingjie Zhang. Study on fabrication and mechanism in of porous metals by spark plasma sintering, Jounal of Materials Science, 2007, 42 (1): 302-306
八、聯系方式:
1. Tel:
2. E-mail:kun.wang@whut.edu.cn
3. 工作地址(實驗室):武漢理工大學硅酸鹽建筑材料國家重點實驗室411室。
英文版
1. Name: Kun Wang
2. Brief Introduction:
1) Date of birth: October, 1981
2) Degree: Ph.D
3) Title: Associate Professor
4) Working Department: State Key Laboratory of Silicate Materials for Architectures, Wuhan University of Technology
3. Education Experience:
2007.02 - 2010.12,Ph.D, Monash University, Australia
1999.09 - 2005.06,Master and Bachelor's Degree, Wuhan University of Technology, China
4. Working Experience:
2016.08 until now,Associate Professor, State Key Laboratory of Silicate Materials for Architectures, Wuhan University of Technology, China
2015.01 - 2016.07,Research Fellow, Department of Materials Engineering & Monash Centre for Additive Manufacturing, Monash University, Australia
2011.02 - 2014.03,Research Fellow, Department of Chemical Engineering, Monash University, Australia
5. Research Fields:
(1) Synthesis and characterization of novel ceramic nanostructures via sol-gel route;
(2) Laser direct deposition and sintering of ceramics or metal-ceramic composites by additive manufacturing techniques;
(3) Fabrication of ceramic membranes, polymer membranes, and composite membranes for water purification and desalination.
6. Research Project:
Please see the above Chinese information.
7. Representative Papers:
Please see the above Chinese information.
8. Contact information:
(1) Tel:
(2) E-mail:kun.wang@whut.edu.cn
(3) Location of lab: State Key Laboratory of Silicate Materials for Architectures, Wuhan University of Technology